Construction Hoists (Buck Hoist) Equipment and Services
NWF Leasing provides various sizes of Construction Hoist and Material Hoists/Personnel Hoist for both industrial and construction applications worldwide. We use Alimak (registered) products and materials for all our construction projects.
NWF Leasing provides complete installation and disassembly for all our construction hoist. We offer material, personnel or construction hoists up to 6,200 lbs.
NWF Leasing has full fabrication on-site to customize the elevator to your high-rise construction needs. NWF has both single and dual-car options are available. We can provide turnkey solutions including arranging for the crane for installation dismantling and jumps, construction of the landing platform, installing gates on the landing, wing walls as necessary, and a trash chute as desired.
Safety is our #1 concern. We have all the appropriate licenses, and a top-rated insurance carrier insures us. We hold Mechanic, General Contractor, and Elevator licenses in multiple states. All our elevators conform to the ANSI/ASSE A10.4 Code. We are also the only Rack and Pinion Construction Hoist company to have a Certificate of Confidence in Florida.
Buck Hoist, also known as a temporary elevator, personnel hoist, or construction hoist/construction elevator. Our hoists use a rack and pinion operation system that allows precise travel control between the tower sections/floors. Allowing for ease of getting personnel or materials to the areas/floors needed. No bucking or quick starts and stop just a smooth ride.
We offer the creativity to construct your construction hoist wherever you need; no job configuration is too complicated for us. With safety, reliability, and the flexibility to configure your construction hoist to fit your specific project needs makes renting your construction hoist from Northwest Florida Leasing a great option, give us a call and let’s discuss your project.
Contact us today to see what we can do for you and your next construction projects.


Our Certifications
ELCO14 | Fl Registered Elevator Company License |
CC271 | Fl Elevator Technicians License |
E212 | GA Certificate of Authorization GA Dept. of Insurance |
M-1328 | GA Mechanics License |
57121 | LA General Contractor License |
19415-SC | MS General Contractors License |
AL1276-EL | AL Elevator Contractor License |
AL1277-EL | AL Elevator Mechanics License |
Features
Along with full assembly, disassembly and on-site repairs we also offer the following features:
- Fully Assembled Enclosed Car
- Over Speed Safety Governor
- Control and Limit Switches
- Base Fence Enclosure
- Base Power Disconnect
- Rack & Pinion
- Interior Car Lighting
- Interlocked Roof Hatch
- Landing Gates
Options
Many optional features are available depending on your needs.
- Custom Sizing
- Landing Gates
- Base Landing Platform
- Wing Walls
- Trash Chutes
- Voice Communication
- Free Standing
Equipment
Alimak Scando Construction Hoists
Alimak Scando FC 28/37 TD is a construction hoist with a maximum pay-load capacity of 6,200 pounds. Maximum speed of 157 feet per minute and a maximum lifting height of 490 feet.
The cage of the FC 28/37 TD has an internal width and length of 4’ 11” by 12’ 1 ¾” and an internal height of 7’ ¾”. The two standard door openings are 4’ 10 ¾” by 6’ ¾”.
Alimak Scando 27/37 C is a construction hoist with a maximum pay-load capacity of 6,000 pounds. Maximum speed of 150 feet per minute and a maximum lifting height of 980 feet.
The cage of the 27/37 C has an internal width and length of 4’ 11 3/16” by 12’ 1 21/32” and an internal height of 8’ 6 23/64”. The standard door openings are 4’ 10 17/64” by 6’ 6 47/64”.
Alimak Scando 18/30 is a construction hoist with a maximum pay-load capacity of 4,000 pounds. Maximum speed of 150 feet per minute and a maximum lifting height of 500 feet.
The cage of the 18/30 has an internal width and length of 4’ 3 13/64” by 9’ 10” and an internal height of 7’ 21/32”. The standard door openings are 4’ 10 21/32” by 6’ 47/64”.
Alimak Scando 20/30 TD is a construction hoist with a maximum pay-load capacity of 4,400 pounds. Maximum speed of 131 feet per minute and a maximum lifting height of 492 feet.
The cage of the FC 20/30 TD has an internal width and length of 4’ 3 3/16” by 9’ 10 7/64” and an internal height of 8’ 4 25/64”. The standard door openings are 4’ 27/64” by 6’ 6 47/64”.
Robust passenger construction hoists from Alimak Scando range:
- Max capacity: 2,000 kg
- Two and three motor drive options
- Speeds – 40m/m & 28m/m
- Base entry ground enclosure with full rise gate
- Vertical pipe system available
- Cable basket or trolley options
- image for illustration purposes only

Serial No. | On application |
Y.O.M. | 1997 - 2002 |
Configuration height | Accessories available |
Machine/cabin length | 3m and 3.2m cages |
Machine/cabin width | 1.3m and 1.5m cages |
Machine/cabin height | 2.55 mtr. |
Product class | Select class |

LET’S WORK TOGETHER
____________________